Recommended as a primer for slightly chalky surfaces, masonry, stucco, wood, brick, cement tile, aluminum, primed metal, and previously painted surfaces. UL200 may also be applied as a hot primer on fresh stucco.

Coverage depends on surface texture, thickness of application, and porosity. The average coverage on most surfaces is approximately 300 sq. ft. per gallon.

Apply with a Brush, Roller ( min ¾ nap ), or airless sprayer. Recommended tip size: .015 to .019.

1 to 2 hours at 70 F and 50% relative humidity. Dry times may vary depending on air temperature, wind, and humidity.

For Masonry: Remove all loose paint, dirt, mildew and chalk by high pressure water cleaning or other methods to obtain a sound surface. Do not apply to heavily chalked surfaces. For metal: When used as a DTM primer rusted or raw steel must be primed with a rust inhibitive primer and rust must be removed or treated. For wood: Acrylux UL200 can be used over most previously painted wood; prime any staining wood with a stain blocking primer.