For use on exterior masonry, stucco, wood, brick, cement tile, aluminum, primed metal, and all previously painted surfaces.

Theoretical coverage at 6.4 wet/3.0 dry mils is 250-300 square feet per gallon. Material losses during application and surface porosity will vary and must be taken into consideration when estimating job requirements.

Apply with a Brush, Roller (min ¾ nap ), or airless sprayer. Recommended tip size: .015 to .021.

1 to 2 hours in direct sunlight; dry times may vary depending on air temperature, wind, and humidity.

For Masonry: Remove all loose paint, dirt, mildew and chalk by high pressure water cleaning or other methods to obtain a sound surface. Seal any remaining chalk with Acrylux 3 to 1 Primer/Sealer. For Metal: May be applied directly to weathered aluminum and galvanized steel. All other applications to metal require an appropriate primer. For Wood: Acrylux is self-priming over most wood, prime any staining wood with a stain blocking primer.