For repairing and filling cracks, holes, and imperfections in: exterior walls, stucco, banding, brick, roof tiles and all other masonry surfaces. Also can be used on wood & plaster.

Coverage varies according to application and crack widths.

This product is a thick elastomeric patch, and you can apply it with a stiff bristle brush, short nap roller, or hand trowel. Once you apply the patch to the surface, use a brush to spread the masonry patch evenly over the crack. It is unnecessary to open up or v-out cracks when using this product. Always test the finish coat for bleed-through or prime all patched areas. Some repairs may require a second layer for a flush finish.

Dries in 4 to 6 hours in direct sunlight; dry times may vary depending on air temperature, wind, humidity and application thickness.

For masonry: remove all loose paint, dirt, mildew and chalk by high pressure water cleaning or other methods to obtain a sound surface. Seal any remaining chalk with Acrylux 3 to 1 Sealer or any other appropriate masonry sealer/primer.