Recommended for exterior wood decks, fences, siding, outdoor furniture, patios, walkways, and other properly prepared wood surfaces.

Theoretical coverage at 6 mils wet/3.0 dry mils is 250 square feet per gallon. Material losses during application and surface porosity will vary and must be taken into consideration when estimating job requirements.

Apply with nylon or polyester brush, stain pad, or professional spray equipment (back-brush when spraying). Stir thoroughly and blend multiple containers for uniform color. Apply in small sections, working end-to-end to avoid lap marks. Use one coat on new wood or two coats on weathered surfaces for best performance.

1 to 2 hours in direct sunlight; dry times may vary depending on air temperature, wind, and humidity.

Surfaces must be clean, sound, and completely dry. Remove dirt, mildew, loose fibers,

and any peeling or weathered stain by cleaning, scrubbing, or sanding as needed. Test new treated wood for porosity before application. Allow 24–48 hours of drying after cleaning to ensure proper adhesion.