Fresh Wall Interior Primer
Fresh Wall Interior Primer
Fresh Wall Interior Primer is a quick-drying, water-based primer suitable for a variety of surfaces. It delivers strong adhesion, mildew resistance, and dependable sealing performance. With superior hiding ability, it’s perfect for transitioning between colors while helping to reduce the number of paint coats required. Recommended for use on drywall, plaster, and other properly prepared interior walls and ceilings.
-
Suitable for new drywall, plaster, stucco, cured masonry, interior wood and trim, aluminum, galvanized metal, and previously painted interior surfaces.
-
Covers up to 400 sq. ft. per gallon at 1.5 mils dry film thickness. Actual coverage may vary depending on surface texture, porosity, and application method.
-
Apply with a Brush, Roller (Min 3/16” nap) or airless spray. Recommended tip size: .013 to .015.
-
Dries to touch in 30 minutes and may be recoated in 1 hour at 77 °F (25 °C) and 50% relative humidity.
-
All surfaces must be clean, dry, and sound. Remove dirt, grease, mildew, chalk, and loose paint. Sand glossy areas to a dull finish. Patch and repair holes or cracks. Allow new plaster or masonry to cure before priming. Remove dust before application.
Prime New Drywall
A quick-drying, low-odor primer designed to seal new drywall and create a uniform surface for topcoats. It delivers excellent adhesion, helps minimize surface imperfections, and ensures smooth, consistent paint coverage.