DESCRIPTION:

A clear sealer designed for interlocking brick pavers and concrete surfaces. COLORBACK is a solvent acrylic, non-yellowing coating that gives a semi wet look. COLORBACK protects new pavers and brings back old faded pavers by enhancing the true color.

SURFACE PREPARATION:

Pavers must be clean, dry and fee of any dirt, stains, and failed sealer.

MATERIAL PREPARATION:

Stir sealer from the bottom up in order to get a uniform consistency. DO NOT THIN MATERIAL.

APPLICATION:

Brush, roll or spray. Apply COLORBACK evenly and do not leave puddles or roller marks. Use new roller frame and grid (free from old paint or sealer). Use a ¾” nap for most types of pavers. One coat is recommended (applying too many coats will result in a very slippery surface and could cause blushing).

COVERAGE:

150 – 200 sq. ft. per gallon.

DRY TIME:

Surface will be tack free in 1 to 2 hours. Light foot traffic in 4 to 6 hours. Vehicle traffic in 48 hours.

CLEAN UP:

Clean up all tools with xylene, xylol, or lacquer thinner. DO NOT THIN MATERIAL.

LIMITATIONS:

Do not apply to damp or wet pavers.

WARNING: Whenever a surface is coated it may become slippery. Non-skid additives may be incorporated to help this from happening. It is the sole responsibility of the applicator to determine whether non-skid additives should be used.

Colorback paver maintenance step-by-step instructions:

 

BEAUTIFUL PAVER PROTECTION!

COLORBACK

SUPER CLEAR PAVER SEALER


Protect and beautify your inter-locking pavers. Great for driveway, pool decks, walkways, and commercial applications.

Protects Against: